beam approach
英 [biːm əˈprəʊtʃ]
美 [biːm əˈproʊtʃ]
波束引导进场
双语例句
- The BEAM design approach creates nimble robots from simple components, with no programming required.
很赞赏BEAM的设计理念：无需编程，用简单的元件制作出敏捷的机器人。 - The longitudinal elastic wave transmission through a coupling joint of two collinear semi-infinite beam structures is investigated by using wave theory approach.
采用波动分析法研究了纵向弹性波在两半无限梁耦合点的传播。 - Standard beam approach system
标准波束引导进场系统 - Most of Minisize span suspension bridges with steel truss beam constructed in early age will approach its designed working life.
早期修建的小跨径钢桁梁悬索桥大部分已接近设计年限，正确评估其承载能力是桥梁维修、加固和技术改造的基本依据。 - Standard beam approach system Accounting Standard Steering Committee
标准波束引导进场系统会计标准指导委员会 - In this letter, a beam steering approach based on horizontally moving phase steps is proposed.
本文基于平均斜率与波束指向的关系，提出了一种基于相位面台阶平移的波束扫描方法。 - A new kind of materials applied to the artificial heart valve, rutile-TiO2 thin film on low temperature isotropic pyrolysis carbon ( LTI-carbon) was deposited through the enhanced ion beam approach.
用离子束辅助沉积的方法在人工心脏瓣膜热解碳材料表面制备氧化钛薄膜，研究其对抗凝血性能的改善情况，以探索新型的人工瓣膜材料。 - The deflections tested at the midspan of the prestressed concrete beam approach those deflection values which are not followed the bridge specifications to reduce the stiffness.
其次，实测预应力梁跨中挠度与不按桥规折减刚度计算的挠度值接近。 - Technical Essentials and Training Method of Forward Piked Salto Mount to Stand on Beam with Approach Run from Beam End
平衡木木端助跑屈体前空翻上成站木动作的技术要领和训练方法 - The paper introduces construction technology and difficult points in construction of continuous beam cast in place on freeway, poses the approach which the beam mould board frame can be suitable for precompression controlling, and has verified it with examples.
介绍了高速公路现浇连续箱梁施工工艺及施工难点，提出了一种高速公路现浇连续箱梁模板支架实用预压控制方法，并结合实例对该方法进行了验证。 - Laser beam analysis ── the beam effective radius approach
激光光束传输特性分析&等效波面曲率半径法 - The field distribution of the gain glass waveguide is analyzed with beam propagation method ( BMP), a numerical approach to calculate the field added gain gene is introduced.
在采用BPM法的基础上分析了玻璃波导中场的分布，提出了考虑增益后的光场数值模拟计算方法； - The purpose of this paper is to make an analytical expression of the field in up-tapered fibre by using the Huygens-Fresnel diffraction integral and path-integral methods in quantum mechanics. Ray matrix of Gaussian Beam in derived under WKBJ approach.
本文利用Huygens-Fresnel衍射积分和量子力学中的路径积分方法，推导出在倒拉锥光纤中光场的解析表示式，并在WKBJ近似下得到了高斯光束传播的射线矩阵。 - Based on Timoshenko beam theory, a hybrid approach combining wave control to independent modal space control is presented to research the vibration control of cantilever beam.
基于Timoshenko梁理论，采用波控制和独立模态空间混合方法，对悬臂梁的振动控制问题进行研究。 - Meanwhile, a detailed comparison between the self-convergent beam width method and the asymptotic approach is made and the equivalence between the two methods is discussed. In addition, a concise physical meaning of the self-convergent beam width method is given.
还对自收敛束宽法和渐近近似法作了详细比较，对这两种方法的等价性作了讨论，并且对自收敛束宽法赋予了简明的物理含义。 - By analysing the bearing condition of pier cap and foundation beam ( tie beam), this article gives the design approach of pier cap and foundation beam ( tie beam).
通过分析墩帽及基础梁（拉梁）的受力状态，提出了墩帽及基础梁（拉梁）的设计方法。 - Study on determining the direction of laser beam sensors via equivalent-probe approach
利用测头等效法确定激光单点测头的方向 - The conventional theory of beam analysis was combined with the finite element method, which was applied at the local part of the beam, based on the Basic Units Approach.
方法是采用梁的解析理论与有限元计算相接合的途径，其中有限元计算是在基本单元法（BasicUnitsApproach）基础上在梁的局部区进行的。 - As an example, load paths in a cantilever beam were plotted by means of this approach and some differences between load paths and principal stress trajectories were compared.
作为例子，用此法得到了悬臂梁的可视化内力路径，并比较了内力路径与主应力轨迹的差异。 - The flexible beam was discretized by employing the approach of assumed modes and the effects of the transverse deformation-induced longitudinal deformation were also included in the whole longitudinal deformation.
采用假设模态法对柔性梁进行离散，离散时计及了横向变形对纵向变形的耦合。 - This paper presents an analytical expression for the gain of the Free Electron Laser Operating in Raman Regime with a warm electron beam through the approach of one dimensional magnetohydrodynamics.
采用一维流体理论导出了暖电子束条件下Raman型自由电子激光增益的解析式。此式清晰地描述了自由电子激光中的暖束效应。 - Based on the fundamental principle of the Fusar Beam Method, a high bench approach is developed for elimination of mined-out areas, the successful application of which has yielded remarkable results in a molybdenum-tungsten mine in Henan Province.
依据伏萨尔架法基本原理，开发了高台阶处理采空区工艺，在河南某钼钨矿的应用取得了很好的效果。 - Due to difficulties with quantitative analysis in theory on shear resistance of reinforced concrete composite beam, numerical simulation becomes a direct and efficient approach.
钢筋混凝土叠合梁的斜截面承载力，从理论上定量分析存在着较多困难，但数值模拟分析是一种直接有效的途径。 - The total jointless bridge cancels the expansion joints of the whole bridge deck, thus, the temperature deformation of the main beam is absorbed by CRCP approach pavement that behind the approach slab.
全无缝桥梁取消了全部桥面和路桥伸缩缝，主梁的温度变形由搭板后的CRCP接线路面来吸纳。 - Currently, the most common way of transporting girder wheel-rail beam carrier transporting girder, but this approach is not suitable for long distance transportation, or is not suitable for carrying large tonnage of precast beams.
目前，最常见的运梁方式的是轮轨式运梁车运梁，但这种方式存在着不适合长距离运输和大吨位预制梁运输等问题。 - This paper focuses on the Shao Jiang Bridge and choose the better hanging basket. This paper introduced key continuous prestressed concrete beam bridge construction technology, and gives the reasonable approach about the main issues in the construction process.
本文以新邵资江二桥为工程背景，选择了经济合理的挂篮形式，介绍了预应力混凝土连续梁桥关键的施工技术，并对出现的主要问题提车了合理的处理方法。 - Based on the theory of multiple beam interference, a novel approach for wavefront modulation is proposed, with which the problem of conventional beam steering techniques that the achievable steering angles are uncontinuous is solved.
基于多孔干涉理论提出了一种新的波前调制方式，解决了传统偏转技术可实现角度有限且分布不均匀的问题。 - Experimental results show this approach could gain the flat-top beam and it is an effective approach for laser beam shaping.
实验结果表明，该方法对激光光束的整形效果明显，获得了所要求的均匀光束。 - Now there are four primary calculation methods of the cross girder beam, including rigid connected beam method, the Board-analogy Approach method, beam analogy method and the numerical method.
现阶段关于箱梁横梁的计算方法主要有4种，分别是刚性横梁法，比拟板法，梁系法，数值法。